Supercharged Knife Punch Air Cylinder Working Temperature 0ºC-60ºC Knife To Knife Exchange Super Fast

Feature:

1. It is suitable for bell type and type transmission, etc.
2. The product is specially designed for the needs of high-speed cutting.
3. Directly mounted on the main shaft for cutting.

5. The machine can be detected by the position of the upper and lower loosening of the clamping tool, which improves the accuracy and speed of the mechanical tool change.

Order Form

BMV--10--U--16--M--70--MA

           1)  2)   3)  4)   5)    6)

Product Description

1.Working pressure: The pump can operate within a pressure range of 0.4 megapascals (MPa) to 0.6 MPa. This can also be expressed as 4 kilograms-force per square centimeter (kgf/cm²) to 6 kgf/cm². The compressed air used to filter the pump should also be within this pressure range.

2.Transmission oil: The pump is designed to work with a specific viscosity grade of oil, which is ISO VG32 or an equivalent viscosity grade.
Working temperature: The pump can operate within a temperature range of 0 degrees Celsius to 60 degrees Celsius.
Split out quantity: The pump can output four different quantities of oil, which are 150cc, 110cc, 70cc, and 50cc.
Voltage: The pump can operate with three different voltage levels, which are DC24, AC110, and AC220.

Suitable for direct drive spindle, motor built-in spindle, etc., special for high-speed cutting:
The hydraulic motor or spindle is designed to be used in direct drive applications, such as motor built-in spindles.

The motor or spindle is specifically designed for high-speed cutting, indicating that it is capable of operating at high speeds while maintaining its performance and reliability.

Our production:

A hydraulic cylinder and piston are key components in hydraulic systems, which are widely used in various industries for generating and controlling mechanical motion. Here's a breakdown of each component:

Hydraulic Cylinder:

A hydraulic cylinder is a mechanical actuator that converts hydraulic energy into linear mechanical force and motion.
It typically consists of a cylindrical barrel, a piston, a piston rod, seals, and end caps.
The cylinder barrel is the main body of the cylinder, which houses the piston and allows fluid to act on one side of the piston.
End caps are fitted on both ends of the cylinder barrel to provide support and containment for the piston and seals.
Seals are used to prevent leakage of hydraulic fluid and maintain pressure within the cylinder.
Hydraulic cylinders come in various types, including single-acting, double-acting, telescopic, and multi-stage cylinders, each serving different purposes based on application requirements.
Piston:

The piston is a cylindrical component that moves back and forth inside the cylinder barrel.
It is typically fitted with seals to ensure a tight fit against the cylinder wall, preventing leakage of hydraulic fluid.
The piston divides the cylinder into two chambers: the rod side (also known as the blind side) and the opposite side (also known as the cap side).
When hydraulic fluid is pressurized and introduced into one side of the cylinder, it pushes the piston, generating linear motion in the direction of the applied force.

In double-acting cylinders, hydraulic pressure can be applied alternatively to either side of the piston, allowing for bidirectional movement.
Together, the hydraulic cylinder and piston form the basis of hydraulic systems, enabling precise control and efficient transmission of mechanical power in various industrial applications, such as construction equipment, manufacturing machinery, agricultural machinery, and more.

FAQ

Q1: We have our own factory and can provide the best price and service.

Q2: We accept customization or non-standard products.

Q3: The MOQ depends on the customer's needs, and trial orders are welcome before mass production.

Q4: The delivery time is 7 days if the company has stock, and 15-30 working days if we don't have stock. However, the delivery time also depends on the quantity and requirements of the products.

Q5: The company's payment terms are T/T.

Q6: The company does not provide samples.