Place of Origin:
Jiangsu,China
Certification:
CE
Model Number:
BMV - FA
CONTACT US
Product Description
1.Working pressure: The pump can operate within a pressure range of 0.4 megapascals (MPa) to 0.6 MPa. This can also be expressed as 4 kilograms-force per square centimeter (kgf/cm²) to 6 kgf/cm². The compressed air used to filter the pump should also be within this pressure range.
2.Transmission oil: The pump is designed to work with a specific viscosity grade of oil, which is ISO VG32 or an equivalent viscosity grade.
Working temperature: The pump can operate within a temperature range of 0 degrees Celsius to 60 degrees Celsius.
Split out quantity: The pump can output four different quantities of oil, which are 150cc, 110cc, 70cc, and 50cc.
Voltage: The pump can operate with three different voltage levels, which are DC24, AC110, and AC220.
Suitable for direct drive spindle, motor built-in spindle, etc., special for high-speed cutting:
The hydraulic motor or spindle is designed to be used in direct drive applications, such as motor built-in spindles.
The motor or spindle is specifically designed for high-speed cutting, indicating that it is capable of operating at high speeds while maintaining its performance and reliability.
Order Form
BMV--10--U--16--M--70--MA
1) 2) 3) 4) 5) 6)
BMV:Supercharged knife punch pneumatic cylinder | ||
1) | Diameter | 10:Ø100 12:Ø125 |
2) | Applicable model | U:used to MC |
3) | Oil pressure ratio | 11=11:1 12=12:1 16=16:1 25=25:1 30=30:1 39=39:1 51=51:1 |
4) |
M:With hydraulic detection device N:No hydraulic detection device |
|
5) | Spit volume | 50cc, 70cc, 110cc, 150cc,etc |
6) | Mounting type | FA:vertical type,LB:horizontal type |
Our production:
Hydraulic cylinders and hydraulic motors are both crucial components of hydraulic systems, but they serve different purposes and operate in distinct ways.
Hydraulic Cylinder:
As described earlier, a hydraulic cylinder is a mechanical actuator that converts hydraulic energy into linear mechanical force and motion.
It consists of a cylindrical barrel, a piston, seals, and end caps.
Hydraulic cylinders are primarily used for generating linear motion, such as lifting, pushing, or pulling heavy loads.
They operate by pressurizing hydraulic fluid on one side of the piston, which causes the piston to move, thus generating linear force.
Hydraulic Motor:
A hydraulic motor is a mechanical device that converts hydraulic energy into rotary mechanical motion.
It typically consists of a housing, an output shaft, internal gears or pistons, and inlet/outlet ports.
Hydraulic motors are used to drive machinery, such as pumps, conveyors, winches, and other rotary equipment.
They operate by receiving pressurized hydraulic fluid from a pump, which causes the internal components (gears or pistons) to rotate, thus generating rotary motion at the output shaft.
While hydraulic cylinders produce linear motion, hydraulic motors produce rotary motion. However, both components rely on the same principles of hydraulic fluid pressure to generate mechanical movement. They are often used together within hydraulic systems to achieve complex mechanical tasks, such as in hydraulic excavators or hydraulic presses, where both linear and rotary motions are required.
FAQ
Q1: We have our own factory and can provide the best price and service.
Q2: We accept customization or non-standard products.
Q3: The MOQ depends on the customer's needs, and trial orders are welcome before mass production.
Q4: The delivery time is 7 days if the company has stock, and 15-30 working days if we don't have stock. However, the delivery time also depends on the quantity and requirements of the products.
Q5: The company's payment terms are T/T.
Q6: The company does not provide samples.
Send your inquiry directly to us